Miller Engineering’s animated billboards
are our newest addition to our line of
animated neon signs. These new signs
incorporate many new design features
such as improved connectors, no painting
required, longer life, and stiffer
laminations. All animated neon billboard
signs have the same great benefits of all
Light Works neon signs: ready-to-run,
paper-thin, produce no heat, and have
realism second-to-none. Try one today
and you'll be Thrilled! All signs come with
a 3 AAA battery pack. Signs draw 180 ma.
Atlas Moving & Storage
$32.95
7-2081
Atlas moving & Storage Billboard
Dim. 3.75"W x 2.5" H, Suitable for HO/O
scales.
|
Citgo
$32.95
7-8781
Citgo Billboard
Dim. 3.8” T x 2.5” W, Suitable for HO/O scales
|
Galaxy Drive-In
$32.95
Galaxy Drive-In Billboard
Dim. 4.0” W x 2.75” T, Suitable for HO/O scales

|
Galaxy Tool & Die
$32.95
Galaxy Too & Die Billboard
Dim. 4.0” W x 2.75” T, Suitable for HO/O scales
|
HEINZ KETCHUP SIGN
$45.95
7-1081
Heinz Ketchup sign. This is
Miller Engineering's first 16 channel sequencing
sign and is limited production sign of just 500
units. The sign is a replicas the Heinz that sits
atop Del Monte Foods building in Pittsburgh, PA.
|
ILLINOIS CENTRAL
$45.95
7-0981
This is Miller Engineering's second 16 channel sequencing sign and is a limited production sign. The sign is a
replica of the original one that sat above Central
Station in Chicago. This sign makes a great show
stopper on any layout!
Suitable for HO/O Scales and measures 3.65" Tall
x 4.25" wide .
|
Rexall
$49.95
7-7581
Rexall This is our Second in our super animated
series. This sign is a 8 channel sequencing sign that creates some amazing animation.
Suitable for HO/O scales.
Sign height 3.875" x 4.250" wide
Rexall Billboard
|
Sandpiper Lounge
$32.95
7-8681
HO/O scales. #8681, Sandpiper Lounge,
Size 2.7"T x 3.5" W
|
Standard Plumbing
$26.95
7-9181
Standard Plumbing Billboard
Dim. 2.5” W x 1.9” T, Suitable for HO/O scales
The optional mounting method shown on the left
is achieved by putting a thin slot in the building
and inserting the sign.
|
Miller Engineering's Billboards are easy to
mount on your structure. Simply cut a small
.75" wide slot in the roof of your building,
insert the sign. Use a small amount of hot
melt glue or 5 minute epoxy on the topside of
the roof, at each end of the sign, plug in the
connector and you're done. It's that simple!
|
|